Wednesday 21 August 2013

Jet JBTS-10MJS 10-Inch Jobsite Table Saw review and best price

Jet JBTS-10MJS 10-Inch Jobsite Table Saw

Jet JBTS-10MJS 10-Inch Jobsite Table Saw description


707000 Features: -Easy folding stand for convenient storage, quick setup and portability on the job site.-Rubber hand grips on each end of the table allow you to conveniently carry without stand.-Unique base design allows for adequate tool storage on the job site.-Large telescoping extension wing provides a wide 25'''' ripping capacity.-Unique dust shroud design enhances dust and chip removal.-Aluminum extruded rails ensure a square fence and sliding precision.-Rear extension provides out feed support and keeps the work piece flat.-Riving knife system reduces chance of kickback.-Convenient push button arbor lock allows for easy and quick blade change.-Quick lock fence slides smoothly and locks securely for accurate cuts.-Blade diameter: 10''''.-Arbor diameter:.63''''.-Arbor speed: 4000 RPM.-Maximum depth of cut: 3.063''''.-Maximum depth of cut at 45 degrees: 2.5''''.-Maximum rip right of rlade: 25''''.-Motor current: 15 A.-Motor phase: 1 Ph. Specifications: -Heavy duty 15 Amp motor with soft start.-Motor voltage: 120 V.-Prewired voltage: 120 V. Dimensions: -Dimensions: 20'''' H x 31.7'''' W x 45.5'''' D.
User reviews for Jet JBTS-10MJS 10-Inch Jobsite Table Saw -





Jet JBTS-10MJS 10-Inch Jobsite Table Saw features


  • Heavy-duty 15-Amp motor with soft-start
  • European-style riving knife and anti-kickback pawls meet UL standards, prevent kickback
  • Easy-folding wheeled stand for convenient storage, quick set-up and portability
  • Riving knife with anti-kickback pawls for safety
  • Weighing in at just under 100-Pound

Jet JBTS-10MJS 10-Inch Jobsite Table Saw best price



Factory-Reconditioned RYOBI RTS21 15 Amp 10" Table Saw with QuickStand review and discount

Factory-Reconditioned RYOBI RTS21 15 Amp 10

Factory-Reconditioned RYOBI RTS21 15 Amp 10" Table Saw with QuickStand description


Ryobi's RTS21 10-in Table Saw with QuickStand is the top unit of its kind. This tool is perfect for the cost-conscious pro and comes fully loaded with the latest and greatest table saw applications and guarding standards. Whether you are framing a door or building a deck, the Ryobi 10 inch Portable Table Saw is the light-weight, easy to use unit that every homeowner should have in their garage.
Blade Arbor: 5/8"
Blade Diameter: 10"
Blade Tilt: 0° - 45°
Rating: 120 V, AC Only, 60 Hz
Input: 15 Amps
No Load Speed: 5,000 r/min. (RPM)
Cutting Depth at 0°: 3"
Cutting Depth at 45°: 2-1/2"

APPLICATIONS

Straight line cutting operations such as cross cutting, ripping, mitering, beveling, and compound cutting
Dado with optional accessories
Cabinet making and woodworking
INCLUDES

10" Table Saw with QuickStand
Carbide Tipped Blade
Blade Wrenches
Hex Key
Anti-Kickback Pawls
Blade Guard Assembly
Push Stick
Miter Gauge
Rip Fence
Assembly Parts
Operator's Manual
One Year Factory Warranty
User reviews for Factory-Reconditioned RYOBI RTS21 15 Amp 10" Table Saw with QuickStand -





Factory-Reconditioned RYOBI RTS21 15 Amp 10" Table Saw with QuickStand features


  • Powerful 15 Amp motor
  • Tool less QuickStand for easy set up and breakdown
  • Expanded rip capacity, 25-in to the right of the blade and 12-in to the left of the blade
  • On-board storage of miter gauge, rip fence and push stick
  • Dust bag helps keep your work area clean

Factory-Reconditioned RYOBI RTS21 15 Amp 10" Table Saw with QuickStand best price



Ryobi Table Saw | RTS10 review and discount

Ryobi Table Saw | RTS10

Ryobi Table Saw | RTS10 description


The Ryobi 10 in. 15 Amp Table Saw with Stand is lightweight and easy to use, making it a great addition to any tool collection. It features a 15 Amp motor that can generate up to 5,000 RPM for powerful cutting. The 25 in. x 17 in. table provides support for large ripping operations. There is also an adjustable miter gauge for accurate cross cutting.
User reviews for Ryobi Table Saw | RTS10 -





Ryobi Table Saw | RTS10 features



Ryobi Table Saw | RTS10 best price



DELTA 34-976 Deluxe Uniguard Table Saw Blade Guard review and discount

DELTA 34-976  Deluxe Uniguard Table Saw Blade Guard

DELTA 34-976 Deluxe Uniguard Table Saw Blade Guard description


The DELTA 34-976 Deluxe Uniguard Table Saw Blade Guard fits DELTA 10-inch Unisaws and Contractor's Saws, and has an innovative, overhead design that doesn't have a mounting bracket behind the blade to interfere with dado cutting or molding operations. The operator remains protected for non-through cutting operations since the blade guard doesn't have to be removed. For through-cutting, the guard has a removable splitter with anti-kickback pawls that afford the operator additional safety. With a U-shaped support arm, you'll be able to cut the full capacity of the fence; you can also keep half the guard elevated for use of a push stick when cutting with the fence close to the blade. The Uniguard Table Saw Blade Guard comes includes the guard, splitter, table mounting bracket, support arm and extension.
User reviews for DELTA 34-976 Deluxe Uniguard Table Saw Blade Guard -





DELTA 34-976 Deluxe Uniguard Table Saw Blade Guard features


  • Fixed splitter maintains correct alignment with saw blade at all times
  • Tilts with saw arbor for angle cutting
  • Easily removed for non-through cutting applications
  • Clear, see-thru LEXAN, split-basket shields
  • Universal Switch Mounting Bracket

DELTA 34-976 Deluxe Uniguard Table Saw Blade Guard best price



Grizzly G0690 Cabinet Table Saw with Riving Knife, 10-Inch review and discount

Grizzly G0690 Cabinet Table Saw with Riving Knife, 10-Inch

Grizzly G0690 Cabinet Table Saw with Riving Knife, 10-Inch description


Arbor speed: 4 300 RPM • Arbor size: 5/8". Maximum dado width: 13/16" • Maximum rip capacity: 291/2". Maximum depth of cut @ 90-Degree: 3-1/8" • Maximum depth of cut @ 45-Degree: 2-3/16". Motor: 3 HP 220V single-phase Lesson Table height from floor: 34" • Table size with extension: 27" x 40" • Overall dimensions: 62"L x 41"W x 40"H,Maximum dado width: 13/16" • Maximum rip capacity: 291/2",Maximum depth of cut @ 90-Degree: 3-1/8" • Maximum depth of cut @ 45-Degree: 2-3/16".
User reviews for Grizzly G0690 Cabinet Table Saw with Riving Knife, 10-Inch -





Grizzly G0690 Cabinet Table Saw with Riving Knife, 10-Inch features


  • Arbor speed: 4 300 RPM • Arbor size: 5/8-Inch; Maximum dado width: 13/16-Inch • Maximum rip capacity: 291/2-Inch
  • Maximum dado width: 13/16-Inch • Maximum rip capacity: 291/2-Inch
  • Maximum depth of cut @ 90-Degree: 3-1/8-Inch • Maximum depth of cut @ 45-Degree: 2-3/16-Inch
  • Motor: 3 HP 220V single-phase Lesson
  • Table height from floor: 34-Inch • Table size with extension: 27-Inch x 40-Inch • Overall dimensions: 62-InchL x 41-InchW x 40-InchH

Grizzly G0690 Cabinet Table Saw with Riving Knife, 10-Inch best price



Grizzly G0715P Polar Bear Series Hybrid Table Saw with Riving Knife, 10-Inch review and best price

Grizzly G0715P Polar Bear Series Hybrid Table Saw with Riving Knife, 10-Inch

Grizzly G0715P Polar Bear Series Hybrid Table Saw with Riving Knife, 10-Inch description


First shipments arriving in the middle of September. Our new Hybrid in dazzling white with an incredible introductory price. Get the best of both contractor style and cabinet style table saws with this Polar Bear Series Hybrid Table Saw. You get the easy-to-transport weight and size of a high-end contractor saw but with the dust control and full features of a cabinet saw. Just like our other table saws this hybrid also has a quick-change blade guard but with anti kickback pawls that can be positioned away from the work piece. The interchangeable true riving knife offers protection for operations that require you to remove the blade guard such as non-through cutting operations. Add a serpentine belt and pulley system and you've got a saw that will be the envy in any shop or work-site. SPECIFICATIONS * Motor: 2 HP 110V/220V single-phase prewired to 220V * Amps: 16/8 * Precision-ground cast iron table w/wings * Measures: 27"D x 40"W * Table height: 34" * Footprint: 20"L x 21-1/2"W * Arbor: 5/8" * Arbor speed: 3850 RPM * Capacity @ 90-Degree: 3-1/8" * Capacity @ 45-Degree: 2-3/16" * Rip capacity: 30" right 12" left * Quick change between riving knife and splitter guard * Overall size: 60"L x 36"W x 40"H * Approximate shipping weight: 414-Pound.
User reviews for Grizzly G0715P Polar Bear Series Hybrid Table Saw with Riving Knife, 10-Inch -





Grizzly G0715P Polar Bear Series Hybrid Table Saw with Riving Knife, 10-Inch features


  • Our new Hybrid in dazzling white with an incredible introductory price
  • Get the best of both contractor style and cabinet style table saws with this Polar Bear Series Hybrid Table Saw
  • You get the easy-to-transport weight and size of a high-end contractor saw but with the dust control and full features of a cabinet saw

Grizzly G0715P Polar Bear Series Hybrid Table Saw with Riving Knife, 10-Inch best price



DEWALT DW7440RS Rolling Saw Stand review and discount

DEWALT DW7440RS Rolling Saw Stand

DEWALT DW7440RS Rolling Saw Stand description


Versatile and dependable, the DEWALT Rolling Table Saw Stand pairs heavy-duty aluminum construction with innovative details. It keeps your work at an ideal height while helping you keep work pieces under control for accurate cuts. Plus, at just 33 pounds with folding legs and convenient heavy-duty wheels, it is built for easy transport.

callout box top
Rolling Table Saw Stand
At a Glance:
  • Heavy-duty aluminum construction handles 200-pound loads

  • Wide stand base and offset rear legs provide stability for improved material control

  • Work height ideal for a wide variety of table saw applications

  • Retractable handle and rugged wheels make transport easy and ergonomic

  • One-year limited warranty
callout box bottom
DEWALT Rolling Table Saw Stand

Constructed with durable aluminum, this table saw stand can handle up to 200-pound loads. View larger.
Sturdy, Lightweight Aluminum Construction
Although it's built for easy portability, the Rolling Saw Stand does not compromise on performance. Thanks to its aluminum construction, this table saw stand is both strong and lightweight. At just 33 pounds, the stand is easy to transport to and from jobsites, which allows you to take advantage of having a versatile, stable saw setup--no matter where your job takes you. It can handle loads up to 200 pounds.

Convenient Design That's Stable Yet Portable
The stand's wide base and rear offset legs are designed to provide stability and support for feed control. In between jobs, quick-release levers allow the legs to be folded for more convenient storage, and a heavy-duty kickstand allows the unit to stand upright with the saw still attached for improved mobility and more convenient storage.

For added convenience when loading and unloading, special quick-connect stand brackets attach to your saw to make detaching the saw from the stand incredibly easy.

Ergonomic Details Keep You Comfortable
Being compact and lightweight isn't all that makes this stand easy to transport. Its large, heavy-duty wheels are built to roll over steps, curbs, and jobsite debris. Plus a retractable soft-grip handle slides out when it's transport time, allowing you to pull the saw behind you comfortably. This keeps the tool's weight centered near the ground and reduces strain on your arms and back.

Similarly smart details improve your user experience when the table's in use too. Rubber feet keep the stand from sliding on smooth surfaces and preventing damage to your work pieces or the floor where you are set up. Moreover, the stand positions the cutting table at a height that is ideal when working on a wide variety of table saw applications, further reducing unnecessary strain on your body and helping you work longer.

This DEWALT Rolling Table Saw Stand is backed by a one-year limited warranty.

What's in the Box
DW7440RS DEWALT Rolling Table Saw Stand.


STABILITY
Sturdy aluminum legs
have rubber feet to keep
table from sliding.
PORTABILITY
Large heavy-duty wheels
make portability easy.
EASE OF USE
Saw is compact
and easy to store.


User reviews for DEWALT DW7440RS Rolling Saw Stand -





DEWALT DW7440RS Rolling Saw Stand features


  • Lightweight design weighs only 33lbs. delivers 20% less weight to carry than other competitive mobile stands
  • Heavy-duty kickstand allows the stand to balance upright for mobility and storage
  • Quick connect stand brackets attach to saw for easy detachment from stand for loading and unloading
  • Wide stand base and offset rear legs provide stability and support for material feed control
  • Folding legs with quick release levers collapse under the stand, minimizing overall size for transport.

DEWALT DW7440RS Rolling Saw Stand best price